During its lifetime, it's only logical to assume your Air Conditioning  system might need an occasional "tune up" along the way.

 Would you drive your car 100,000 miles without oil changes or some kind of maintenance?

The same holds true for your home comfort system.

Regular preventative maintenance is the best way to ensure trouble-free operation and peak performance. It also keeps your system running at its optimal efficiency levels, which keeps energy usage - and your energy bills - in check. But just as important, preventative system maintenance gives you peace of mind.

Pre-season maintenance can help you avoid a system failure on the hottest or coldest day of the year. It can also help you avoid a frantic search for our Phone number So that we can be called to repair or replace your broken system.

We like many other Trane dealers provide priority service for our customers who have an annual maintenance or service agreement. Your existing relationship with us is worth its weight in gold when it's a 95-degree July day and your air conditioning system has stopped working.!!!!

If your air conditioning system both heats and cools your home, you should have maintenance performed in the spring and fall.

If you have a air conditioning-only system, maintenance should be performed at least once a year prior to the air conditioning season.

We will do a complete system operation check in both cooling and heating modes.

 If you have a heat pump, we will also check the defrost operation,

All other major components and safety devices both in the condensing unit and the air Handler will be checked.

The air conditioner's outside coil will be inspected for corrosion/damage and cleaned, 

The Air Handlers evaporator Coil will also be inspected for signs of debris build up and corrosion

Filters will be checked  cleaned/replaced depending on type

Most modern residential air conditioning and heating fan motors have permanently-lubricated bearings so no additional lubrication is needed.

All Trane residential air conditioning systems produced after 1988 have a direct-drive blower, which means there are no fan belts to inspect. However, if you have an older system with a fan belt, We will inspect the fan belt and the belt tension and replace it  if needed.

Your duct system will be checked.where its accessible because Inefficient operation can be caused by return air leaks located in non-air conditioned spaces like attics or crawl areas.

Hot or cold air is drawn in through the leak, which is then heated or cooled by your system. This decreases your system's ability to heat or cool your home and also can dramatically increases your FPL energy bill.